PRODUCTS

The R3 is an exceptional loudspeaker for it’s size and cost. Using a dynamic three driver set up it offers extraordinary accurate low frequency and very even, and extended high quality treble performance. It is precisely these attributes which set the R3 apart from the competition, producing an extremely versatile, dynamic and musical sound.

Drive units
All drivers are produced in house to Rega’s exact specifications.

The R3 loudspeaker uses Rega's classic RR125 midrange drive unit. This offers excellent damping of cone resonances, resulting in a smooth midrange response. The R3 also benefits from a new single side firing 5" driver, which utilises an 8 layer voice coil in aluminium rather than copper. This allows us to eradicate any crossover filters for this driver giving the bass seamless integration with the mid range unit, and exceptional timing without compromising any of the midrange and treble performance which Rega is renowned for.

The R3 loudspeaker also uses a front firing port, allowing them to be placed against a wall, if required. The R3 is suitable for all room environments due to it's ease of positioning.

Sound and set-up
The drive units in the R3 have been designed with great care. The crossover needs no additional filter networks to compensate for drive unit problems. Unlike most manufacturers who boast about the complexity of their crossovers, Rega are proud of the simplicity of theirs. This simplicity means that bi-wiring will offer no advantage.

Cabinet Design
With emphasis on sound quality and dynamics the styling compliments rather than stands out. However, the design of the R3 is particularly radical and quite a departure from accepted norms. It’s sleek lines are subtle, it’s dimensions inoffensive and slim - it will stand modesty rather than make a bold statement upon a modern spatial environment. The R3 utilises these styling que’s from the flagship speaker the R9 bringing a fresh, lively and modern style throughout the range.

Rega has worked hard on achieving a dynamic, stylish and most of all enjoyable loudspeaker. We think you will agree when you audition the R3 that it is one of the finest loudspeaker systems on the market.


Speaker Specifications...
Height (without spikes)...748mm
Depth at plinth...............275mm
Width at plinth...............200mm
Weight..................................9kg

Nominal Impedance........6ohms
Sensitivity...........(Approx) 89dB
Bi-wirable/Bi-ampable...........No
Power Handling................100w per channel.

Power handling figures are quoted as a guide. Amplification between 30w and 500w can be used safely depending on the quality of amplification.

Wood finishes: Natural Cherry, Maple, Rosenut